general purpose relays industrial relays r10 series panel plug-in relay 08-2011, rev. 0811 www.te.com ? 2011 tyco electronics corporation, a te connectivity ltd. company datasheets and product specifcation according to iec 61810-1 and to be used only together with the defnitions section. datasheets and product data is subject to the terms of the disclaimer and all chapters of the defnitions section, available at http://relays.te.com/definitions datasheets, product data, defnitions sec - tion, application notes and all specifcations are subject to change. 1 potter & brumfeld contact ratings (continued) type load cycles ul 508 p type, au overlay ag, bifurcated crossbar contact 2a, 120vac, resistive 100x10 3 3 a, 120 vac, resistive 6x10 3 3 a, 30 vdc, resistive 100x10 3 l type, auptag, bifurcated crossbar contact 500ma, 28vdc, resistive 6x10 3 mechanical endurance 10x10 6 ops., except w type is 1x10 6 ops. coil data coil voltage range 3 to 115vdc 4.5ma to 20ma 6 to 115vac coil versions, dc coil coil rated operate coil rated coil code voltage voltage resistance power vdc vdc ?10% mw v - standard dc voltage adjustment 1, 2 and 4 pole v10 3 2.25 10 900 v28 5 3.75 28 900 v52 6 4.5 52 900 v185 12 9 185 900 v700 24 18 700 900 v2.5k 48 36 2500 900 v5.8k 72 54 5800 900 v15.0k 115 86 15000 900 6 pole v6 3 2.25 6 1,500 v16 5 3.75 16 1,600 v25 6 4.5 25 1,500 v90 12 9 90 1,600 v430 24 18 430 1,400 v1.5k 48 36 1500 1,600 v3.5k 72 54 3500 1,500 v9.0k 115 86 9000 1,500 8 pole v5 3 2.25 5 1,800 v14 5 3.75 14 1,800 v20 6 4.5 20 1,800 v72 12 9 72 2,000 v350 24 18 350 1,700 v1.25k 48 36 1250 1,900 v2.8k 72 54 2800 1,900 v8.0k 115 86 8000 1,700 all fgures are given for coil without preenergization, at ambient temperature +23c. n 1 through 8 form c (co) contact arrangement n broad range of coil options provides sensitivity ranging from 25 to 750mw n various contacts switch from dry circuit to 7.5 amps n many mounting and termination options typical applications coin changers, audio equipment, elevators, traffc controls, ultrasonic test equipment, parking toll readers approvals ul e29244; csa lr15734 technical data of approved types on request contact data contact arrangement 1, 2, 3, 4, 6 and 8 form c (co) rated voltage 120vac rated current 7.5a contact material ag, agcdo, au overlay ag, auptag contact style single or bifurcated crossbar min. recommended contact load w type, agcdo, single contact 300ma, 12vdc x type, agcdo, single contact 300ma, 12vdc m type, agcdo, bifurcated contact 300ma, 12vdc y type, ag, single contact 100ma, 12vdc z type, ag, bifurcated crossbar 1ma, 12vdc p type, au overlay ag, bifurcated crossbar dry circuit l type, auptag, bifurcated crossbar dry circuit initial contact resistance all agcdo contact types 100m? all other contact materials and types 50m? frequency of operation 360 ops./hr contact ratings type load cycles ul 508 w type, agcdo, single contact 7.5a, 120vac, resistive 7.5a, 28vdc, resistive 1/8hp, 120vac, same polarity 1/6hp, 240vac, same polarity x type, agcdo, single contact 2a, 30vdc, resistive 100x10 3 5a, 120vac, resistive 6x10 3 5a, 30vdc, resistive 100x10 3 1/20hp, 120vac, same polarity 1/10hp, 240vac, same polarity m type, agcdo, bifurcated contact 5a, 120vac, resistive 6x10 3 5a, 28vdc, resistive 6x10 3 y type, ag, single contact 2a, 120vac 6x10 3 2a, 28vdc 6x10 3 250va, 250vac 30x10 3 125va, 125vac 100x10 3 z type, ag, bifurcated crossbar contact 3a, 120vac 6x10 3 3a, 28vdc 6x10 3 2a, 30vdc 100x10 3 r10 r10-r r10s r10-t
general purpose relays industrial relays r10 series panel plug-in relay (continued) 08-2011, rev. 0811 www.te.com ? 2011 tyco electronics corporation, a te connectivity ltd. company datasheets and product specifcation according to iec 61810-1 and to be used only together with the defnitions section. datasheets and product data is subject to the terms of the disclaimer and all chapters of the defnitions section, available at http://relays.te.com/definitions datasheets, product data, defnitions sec - tion, application notes and all specifcations are subject to change. 2 potter & brumfeld coil versions, dc coil (continued) coil rated operate coil rated coil code voltage voltage resistance power vdc vdc ?10% mw s - sensitive dc voltage adjustment (continued) 2 pole ss110 3 2.25 110 85 ss350 5 3.75 350 75 ss500 6 4.5 500 75 ss2.0k 12 9 2000 75 ss4.5k 18 13.5 4500 75 ss7.5k 24 18 7500 80 ss15.0k 36 27 15000 85 ss30.0k 48 36 30000 80 3 and 4 pole ss52 3 2.25 52 175 ss175 5 3.75 175 150 ss250 6 4.5 250 150 ss1.0k 12 9 1000 150 ss2.2k 18 13.5 2200 150 ss3.7k 24 18 3700 150 ss7.5k 36 27 7500 175 ss15.0k 48 36 15000 150 coil maximum operate coil pick-up code coil current current resistance coil power madc madc ?10% mw j - sensitive dc current adjustment 2 pole j1.0k 45 8.5 1000 75 j2.5k 28 5.8 2500 85 j5.0k 20 4.1 5000 85 j10.0k 14 3.1 10000 100 j15.0k 11.5 2.6 15000 100 j30.0k 8.3 1.7 30000 85 4 pole j1.0k 45 13 1000 175 j2.5k 28 8.4 2500 175 j5.0k 20 6.2 5000 200 j10.0k 14 4.5 10000 200 j15.0k 11.5 3.5 15000 200 j30.0k 8.3 2.5 30000 200 6 pole j1.0k 45 16 1000 250 j2.5k 28 10 2500 250 j5.0k 20 7.2 5000 250 j10.0k 14 5 10000 250 j15.0k 11.5 4.2 15000 270 j30.0k 8.3 2.9 30000 250 8 pole j1.0k 45 20 1000 250 j2.5k 28 13 2500 250 j5.0k 20 9 5000 250 j10.0k 14 6.4 10000 250 j15.0k 11.5 5.3 15000 270 j30.0k 8.3 3.7 30000 250 j - sensitive dc current adjustment - r10s types only 1 pole j500 1) C 4.5 500 10 j1.0k 1) C 3.2 1000 10 j2.5k C 2 2500 10 j5.0k 2) C 1.4 5000 10 j10.0k C 1 10000 10 j16.0k C 0.8 16000 10 j30.0k 3) C 0.6 30000 11 coil versions, dc coil (continued) coil rated operate coil rated coil code voltage voltage resistance power vdc vdc ?10% mw q - special dc voltage adjustment 1 and 2 pole q52 5 3.1 52 500 q110 6 4.5 110 350 q450 12 9.2 450 350 q1.8k 24 17.4 1,800 350 q7.5k 48 36.2 7500 310 q15.0k 72 49.5 15000 350 q30.0k 115 67.5 30000 450 3 and 4 pole q32 5 3.8 32 800 q52 6 4.2 52 700 q185 12 8.4 185 800 q1.0k 24 17.2 1000 600 q3.2k 48 31.1 3200 750 q7.5k 72 49.3 7500 700 q15.0k 115 67.5 15000 900 s - sensitive dc voltage adjustment 1 and 2 pole s50 3 2.25 50 180 s140 5 3.75 140 180 s200 6 4.5 200 180 s800 12 9 800 180 s3.2k 24 18 3200 180 s13.0k 48 36 13000 180 s28.0k 72 54 28000 190 s50.0k 115 86 50000 270 3 and 4 pole s30 3 2.25 30 300 s80 5 3.75 80 350 s110 6 4.5 110 350 s450 12 9 450 350 s1.8k 24 18 1800 350 s7.5k 48 36 7500 300 s16.0k 72 54 16000 350 s40.0k 115 86 40000 350 6 pole s20 3 2.25 20 500 s56 5 3.75 56 500 s80 6 4.5 80 500 s320 12 9 320 500 s1.2k 24 18 1200 500 s5.2k 48 36 5200 500 s13.0k 72 54 13000 400 s30.0k 115 86 30000 500 8 pole s12 3 2.25 12 750 s35 5 3.75 35 750 s52 6 4.5 52 700 s200 12 9 200 750 s800 24 18 800 750 s3.2k 48 36 3200 750 s7.5k 72 54 7500 700 s16.0k 115 86 16000 850 ss - ultra sensitive dc voltage adjustment 1 pole ss220 3 2.25 220 45 ss700 5 3.75 700 40 ss1.0k 6 4.5 1000 40 ss4.0k 12 9 4000 40 ss9.0k 18 13.5 9000 40 ss15.0k 24 18 15000 40 ss30.0k 36 27 30000 45
general purpose relays industrial relays r10 series panel plug-in relay (continued) 08-2011, rev. 0811 www.te.com ? 2011 tyco electronics corporation, a te connectivity ltd. company datasheets and product specifcation according to iec 61810-1 and to be used only together with the defnitions section. datasheets and product data is subject to the terms of the disclaimer and all chapters of the defnitions section, available at http://relays.te.com/definitions datasheets, product data, defnitions sec - tion, application notes and all specifcations are subject to change. 3 potter & brumfeld operative range r10 relays (dc only) typical ranges of operations @ 25c r10 ultra-sensitive ss and jj typical ranges of operation @ 25c typical coil inductance coil versions, dc coil (continued) coil maximum operate coil pick-up code coil current current resistance coil power madc madc ?10% mw j - sensitive dc current adjustment C r10s types only 2 pole j500 1) C 6.3 500 20 j1.0k C 4.5 1000 20 j2.5k 2) C 2.9 2500 25 j5.0k C 2 5000 20 j10.0k 3) C 1.4 10000 20 j16.0k C 1.2 16000 25 j30.0k C 0.8 30000 20 4 pole j500 C 9 500 45 j1.0k C 6.5 1000 45 j2.5k 2) C 4.1 2500 45 j5.0k 3) C 2.9 5000 45 j10.0k C 2 10000 40 j16.0k C 1.4 16000 35 j30.0k C 1.2 30000 45 1) suggested for 5vdc operation 2) suggested for 12vdc operation 3) suggested for 24vdc operation jj - ultrasensitive dc current adjustment 1 pole jj1.0k 45 4.5 1000 20 jj2.5k 28 2.9 2500 25 jj5.0k 20 2.1 5000 25 jj10.0k 14 1.5 10000 25 jj15.0k 11.5 1.2 15000 25 jj30.0k 8.3 0.85 30000 25 2 pole jj1.0k 45 6.5 1000 45 jj2.5k 28 4.1 2500 45 jj5.0k 20 2.9 5000 45 jj10.0k 14 2 10000 40 jj15.0k 11.5 1.7 15000 45 jj30.0k 8.3 1.2 30000 45 4 pole jj1.0k 45 9 1000 85 jj2.5k 28 5.8 2500 85 jj5.0k 20 4.1 5000 85 jj10.0k 14 3 10000 90 jj15.0k 11.5 2.4 15000 85 jj30.0k 8.3 1.7 30000 90 all fgures are given for coil without preenergization, at ambient temperature +23c. coil versions, ac coil (dual coil diode rectifed construction) coil rated operate coil code voltage voltage resistance vac vac ?20% standard ac 2 and 4 pole 6v 6 5 25 12v 12 9 120 24v 24 18 500 48v 48 36 2000 115v 115 86 9000 6 and 8 pole 6v 6 5 15 12v 12 9 90 24v 24 18 350 48v 48 36 1400 115v 115 86 7500 all fgures are given for coil without preenergization, at ambient temperature +23c. operate time multiple of max. pull-in voltage or current operate time (milliseconds) release time (milliseconds) 30 25 20 15 10 release time (no suppression) 5 12 10 8 6 4 2 1. 0 1 .33 1. 5 2.0 2.5 3.0 (curves for reference only. if speci?c values are required, testing is required.) typical operate and release time (all contact con?gurations) 50 40 30 20 10 1. 0 1 .5 2.0 3.0 4.0 10 8 6 4 2 operate time (curves for reference only. if speci?c values are required, testing is required.) release time (no suppression) typical operate and release time (all contact con?gurations ) multiple of max. pull-in voltage or current operate time (milliseconds) release time (milliseconds) coil inductance (henrys) coil resistance (ohms) 50 0 10 0 50 10 1. 0 0.5 0. 1 10 50 10 0 5 00 1k 5k 10 k 1 00 k armature (open) armature (closed)
general purpose relays industrial relays r10 series panel plug-in relay (continued) 08-2011, rev. 0811 www.te.com ? 2011 tyco electronics corporation, a te connectivity ltd. company datasheets and product specifcation according to iec 61810-1 and to be used only together with the defnitions section. datasheets and product data is subject to the terms of the disclaimer and all chapters of the defnitions section, available at http://relays.te.com/definitions datasheets, product data, defnitions sec - tion, application notes and all specifcations are subject to change. 4 potter & brumfeld other data (continued) terminal type solder/plug-in terminals, pcb-tht, 8- or 11-pin octal type plug weight 23 to 40g packaging/unit tray/50 pcs., box/350pcs. accessories for details see datasheet sockets and accessories, r10 relays product code description many versions of sockets and clips available. note: relays with contact current <50ma are not recommended for use in sockets. insulation data initial dielectric strength between open contacts 500v rms between contact and coil 1000v rms between adjacent contacts 1000v rms initial insulation resistance between insulated elements 10g?, 500vdc other data material compliance: eu rohs/elv, china rohs, reach, halogen content refer to the product compliance support center at www.te.com/customersupport/rohssupportcenter ambient temperature -55oc to 75oc category of environmental protection iec 61810 rti - dust protected and rtiii - wash tight terminal dimensions solder terminal dimensions printed circuit terminal dimensions terminal assignment r10 - ac coil diagram dimensions .735 max. (18.67) 1. 1 87 ma x . (30. 15 ) r1 0s: 1 .50 max. (38. 1) .406 (1 0.31) .1 35 (3.43) .21 0 (5.33) 3-48 thread nib .091 dia. x .020 hi gh (2.31) (.51) } ty pe e1 onl y .354 (8.99) #6-32 thread .375 (9.53) .1 71 (4.43) .1 56 (3.96) case r only recommend tape tab be removed after immersion cleaning and before relay is put in service. peel off to permit proper relay ventilation. 2 pole .950 max. (24. 13 , 2 pole 1r 10) 4 pole 1. 1 65 max. (29.59, 4 pole 1r 10 ) 6 pole 1. 375 max. (34.93) 8 pole 1. 580 max. (40. 13 ) .437 (1 1. 10 ) .59 ref . (1 5.0) st ud on narr ow side only ca se e onl y ty pe e6 on ly .085 max. (2 .1 6) ty pe e6 on ly .0 12 (.30) .040 (1 .02) .090 (2.29) .080 (2.03) d (to top of case ) b a c a b c d arrang. type 2 .131 .050 .064 1.251 inline type 7 .131 .040 .013 1.20 inline type 9 .170 .040 .000 1.187 staggered thickness .012 .012 .012 .013 CCC 26 27 14 1 pole 8 9 5 10 6 7 4 3 2 1 2 pole 8 9 5 10 6 7 4 3 2 1 3 pole 4 3 2 1 4 pole 4 3 2 1 14 15 8 16 9 10 11 12 5 13 6 7 14 15 8 16 9 10 11 12 5 13 6 7 6 pole 4 3 2 1 19 9 10 20 21 11 14 15 5 17 18 8 8 pole 4 3 2 1 22 12 13 16 6 7 22 9 10 23 24 11 17 18 5 20 21 8 25 12 13 19 6 7 28 15 16 du al co il
general purpose relays industrial relays r10 series panel plug-in relay (continued) 08-2011, rev. 0811 www.te.com ? 2011 tyco electronics corporation, a te connectivity ltd. company datasheets and product specifcation according to iec 61810-1 and to be used only together with the defnitions section. datasheets and product data is subject to the terms of the disclaimer and all chapters of the defnitions section, available at http://relays.te.com/definitions datasheets, product data, defnitions sec - tion, application notes and all specifcations are subject to change. 5 potter & brumfeld product code structure typical product code r10 -e 1 y 4 -v700 type r10 cradle-style relay with form c contacts r10s super sensitive cradle-style relay with form c contacts case style e non-sealed polycarbonate dust cover (rti) r wash-tight (rtiii), tape sealed plastic case 1) t octal style base on non-sealed polycarbonate dust cover (terminal types 1 & 2 only; 1, 2 & 3 poles only) 1) r10 type only, terminal code 2 or 9 only, no ground or stud terminal and mounting 1 solder/plug-in terminals with #3-48 mounting stud on r10-e; 8-pin octal type on r10-t 2 pcb terminals (std.) 1.62mm (.064in) clearance, 31.75mm (1.25in) seated ht.; 11-pin octal type on r10-t 6 side mounting plate with #6-32 stud, solder/plug-in terminals (#3-48 stud not included) 7 narrow 1.02mm (.04in) pcb terminals, .33mm (.013in) clearance, 30.48mm (1.2in) seated ht. 9 non-shouldered, narrow 1.02mm (.04in) pcb terminals in staggered arrangement 2) 2) available only on 1 through 6 pole models contact style and rating 3) w single contact rated 7.5a max, 300ma min. 4) 5) x single contact rated 5a max, 300ma min. 5) 6) m bifurcated contact rated 5a max, 300 ma min. 5) 6) y single contact rated 2a typ, 3a max, 100ma min. z bifurcated low level contacts rated 100ma typ, 2a max, 1ma min. p bifurcated crossbar dry circuit contacts rated 1ma typ, 3a max, dry circuit min. l bifurcated crossbar dry circuit contacts rated 500 microa typ, 250 ma max, dry circuit min. 3) ratings are at 28vdcv or 115vac. total load must not exceed 30a per relay. 4) use ungrounded frame for ac load of 5a. max ratings are 7.5a at 115vac and 4a at 28vdc for coil codes s & j 5) only available on r10 type, only available with coil adjustment code v, q, s and j. 6) use ungrounded frame for ac load of 5a. max ratings are 5a at 115vac and 3a at 28vdc for coil codes s & j number of poles 1 1 pole 4 4 pole (not available on r10-t) 2 2 pole 6 6 pole (not available on r10-t) 7) 3 3 pole 8 8 pole (not available on r10-t) 8) 7) not available with contact code w 8) only available with case style e, not available with contact code w coil voltage coil code: please refer to coil versions table ac voltage specify coil code consisting of nominal coil voltage followed by w (example: 24v) dc voltage specify coil code consisting of coil adjustment code letter followed by coil resistance (example: v700) pcb layout suggested panel cutout for relay mounting hole layout for bottom view on solder pins terminal & mounting style 6 terminal types e2 & r2 terminal types e9 & r9 (omit unnecessary holes) (omit unnecessary holes) .21 0 (5.33) .320 (8 .1 3) .1 10 (2.79) .450 (1 1 .43) .550 (1 3.97) .420 (1 0.67) .530 (1 3.46) .40 0 (1 0. 16 ) .630 (1 6.0 0) .7 40 (18.80) holes + .004 - . 000 + .10 - .00 dia. .056 1 .42 ( ) .50 0 (1 2.70) .1 00 (2.54) gri d .50 0 (1 2.70) .450 (1 1 .43) 6 pole 2 pole 4 pole .1 50 (3.81) .1 00 (2.54) + .0 04 - . 000 + .10 - .00 ( ) .056 1 .42 holes dia. .281 .0 1 5 (7 .1 4 .38) .1 40 (3.56) x .354 (8.99) .281 (7 .1 4) + .0 05 ? . 000 + .1 3 ? .0 0 .1 09 2.7 7 2 holes dia. ( ) .656 .0 15 (1 6.66 .38) 2 pole ? .343 .020 (8.71 .51) 4 pole ? .562 .020 (1 4.27 .51) 6 pole ? .781 .020 (1 9.84 .51) 8 pole ? 1. 000 .020 (25.40 .51) x = t olerance: .0 10 ( .25) .437 (1 1. 10 ) .1 87 .0 02 di a . (4.75 .05) .1 47 .0 02 di a . (3.73 .05)
general purpose relays industrial relays r10 series panel plug-in relay (continued) 08-2011, rev. 0811 www.te.com ? 2011 tyco electronics corporation, a te connectivity ltd. company datasheets and product specifcation according to iec 61810-1 and to be used only together with the defnitions section. datasheets and product data is subject to the terms of the disclaimer and all chapters of the defnitions section, available at http://relays.te.com/definitions datasheets, product data, defnitions sec - tion, application notes and all specifcations are subject to change. 6 potter & brumfeld product code arrangement material contact style/rating nom. coil v terminals & mounting part number r10-e1p2-115v 2 form c, 2 co au overlay ag bif crossbar / dry circuit 115 vac solder/plug-in w/ #3-48 mounting stud 7-1393765-0 r10-e1p2-v700 24 vdc 6-1393765-9 r10-e1p4-115v 4 form c, 4 co 115 vac 7-1393765-6 r10-e1p4-v700 24 vdc 7-1393765-5 r10-e1w2-v185 2 form c, 2 co agcdo single contact / 7.5a 12 vdc 8-1393765-9 r10-e1w2-v700 24 vdc 9-1393765-1 r10-e1w4-v185 4 form c, 4 co 12 vdc 9-1393765-3 r10-e1w4-v700 24 vdc 9-1393765-5 r10-e1x2-24v 2 form c, 2 co single contact / 5a 24 vac 1-1393766-1 r10-e1x2-115v 115 vac 1-1393766-0 r10-e1x2-s800 12 vdc 1393766-3 r10-e1x2-v185 1393766-5 r10-e1x2-v700 24 vdc 1393766-9 r10-e1x4-115v 4 form c, 4 co 115 vac 1-1393766-8 r10-e1x4-v185 12 vdc 1-1393766-4 r10-e1x4-v700 24 vdc 1-1393766-7 r10-e1x4-v2.5k 48 vdc 1-1393766-5 r10-e1x6-115v 6 form c, 6 co 115 vac 2-1393766-5 r10-e1x6-v90 12 vdc 2-1393766-4 r10-e1x6-v430 24 vac 2-1393766-2 r10-e1y2-j1.0k 2 form c, 2 co ag single contact / 2a typical not applicable 3-1393766-3 r10-e1y2-j2.5k 3-1393766-4 r10-e1y2-v185 12 vdc 4-1393766-0 r10-e1y2-v700 24 vdc 4-1393766-4 r10-e1y2-v2.5k 48 vdc 4-1393766-1 r10-e1y2-v15.0k 115 vdc 3-1393766-9 r10-e1y4-j10.0k 4 form c, 4 co not applicable 4-1393766-9 r10-e1y4-v52 5-1393766-6 r10-e1y4-v2.5k 48 vdc 5-1393766-5 r10-e1y4-v700 24 vdc 5-1393766-7 r10-e1y6-v430 6 form c, 6 co 6-1393766-1 r10-e1y6-v1.5k 48 vdc 6-1393766-0 r10-e1z2-v185 2 form c, 2 co bifurcated / 100ma typical 12 vdc 7-1393766-2 r10-e1z2-v700 24 vdc 7-1393766-4 r10-e1z4-v185 4 form c, 4 co 12 vdc 7-1393766-9 r10-e1z4-v700 24 vdc 8-1393766-1 r10-e1z4-v2.5k 48 vdc 8-1393766-0 r10-e1z6-v430 6 form c, 6 co 24 vdc 8-1393766-6 r10-e1z6-v1.5k 48 vdc 8-1393766-5 r10-t1p2-115v 2 form c, 2 co au overlay ag bif crossbar / dry circuit 115 vac 2-1393769-8 r10s-e1y1-j1.0k 1 form c, 1 co ag single contact / 2a typical not applicable 7-1393769-0 r10s-e1y2-j5.0k 2 form c, 2 co 7-1393769-5 r10-e2p4-v185 4 form c, 4 co au overlay ag bif crossbar / dry circuit 12 vdc pcb, .064" clearance, 1.25" seated ht. 1393767-3 r10-e2p4-v700 24 vdc 1393767-4 r10-e2w2-v185 2 form c, 2 co agcdo single contact / 5a 12 vdc 1393767-7 r10-e2x2-v185 1-1393767-1 r10-e2x2-v700 24 vdc 1-1393767-5 r10-e2x4-v185 4 form c, 4 co 12 vdc 1-1393767-7 r10-e2x4-v700 24 vdc 1-1393767-8 r10-e2y2-v185 2 form c, 2 co ag single contact / 2a typical 12 vdc 2-1393767-6 r10-e2y2-v700 24 vdc 2-1393767-9 r10-e2y4-v185 4 form c, 4 co 12 vdc 3-1393767-5 r10-e2y4-v700 24 vdc 3-1393767-6 r10s-e2y1-j1.0k 1 form c, 1 co not applicable 8-1393769-1
|
